Company Introduction
Our Factory
Development History
Company Culture
Our Certificates
AUTO RGB Amusement Light
Programmable RGB Amusement Light
RGB LED Floodlight
Single Color Amusement Light
E10 E14 Turbo Housing
Accessories
Application Area
Products Video
Enterprise News
Industry News
Please click on the upper right corner
Share it with your circle of friends
LED amusement lights play an important role in theme parks, amusement parks and other places, but due to their long-term use, the lights also need maintenance and overhaul to ensure their normal operation. This article will introduce how to maintain and troubleshoot LED amusement lights.
 |
 |
 |
Daily maintenance
1. Check the connection
• Check the power cord: Check the power cord regularly for damage, breakage or looseness to ensure a firm connection.
• Check the lamp holder and plug: Make sure the lamp holder and plug are not loose or damaged. If there is a problem, replace them in time.
2. Heat dissipation management
• Maintain ventilation: Make sure there is enough ventilation space around the lamp body to avoid overheating.
• Check the heat sink: Check the heat sink regularly for blockage. If there is dust, clean it with a soft brush.
3. Waterproof and moisture-proof
• Check the sealing: For LED lights used outdoors, check the sealing of the lamp body regularly to ensure that the waterproof ring and sealing strip are intact.
• Avoid long-term immersion: Avoid soaking the lamp body in water for a long time, especially in rainy season or humid environment.
4. Cleaning
• Regular cleaning: Use a soft dry or slightly damp cloth to wipe the lamp body and lampshade to remove dust and dirt.
• Avoid using corrosive cleaners: Use mild cleaners and avoid using cleaners containing acid or alkaline to avoid damaging the surface of the lamp body.
5. Regular inspection
• Functional test: Perform functional tests regularly to ensure that the brightness and color of the light are normal, without flickering or extinguishing.
• Record maintenance log: Record the time and content of each maintenance for easy tracking and management.
Common faults and troubleshooting
1. No light
• Check the power supply: Make sure the power switch is turned on and the power cord is connected normally.
• Check the fuse: Check if the fuse is blown, and replace it with a new one if necessary.
• Check the bulb: Check if the bulb is damaged, and replace it with a new one if necessary.
• Check the driver: Check if the LED driver is working properly, and replace it with a new driver if there is a problem.
2. Flickering
• Check the power supply voltage: Make sure the power supply voltage is stable to avoid flickering caused by voltage fluctuations.
• Check the connection: Check whether the connection between the power cord and the lamp holder is firm to avoid poor contact.
• Check the driver: Check whether the LED driver is working properly. If there is any problem, replace it with a new driver.
3. Abnormal color
• Check the power supply: Ensure that the power supply voltage is stable to avoid voltage fluctuations affecting the color.
• Check the bulb: Check whether the bulb is damaged or aged. If necessary, replace it with a new bulb.
• Check the controller: Check whether the RGB controller is working properly. If there is any problem, replace it with a new controller.
4. Too high temperature
• Check heat dissipation: Ensure that there is enough ventilation space around the lamp body and the heat sink is not blocked.
• Check the fan: For LED lights with fans, check whether the fan is running normally. If there is any problem, replace it with a new fan.
5. Waterproof problem
• Check the seal: Check whether the sealing ring and sealing strip of the lamp body are intact. If damaged, replace them in time.
• Check the connector: Check whether the connector of the power cord and the lamp holder is well sealed to avoid moisture infiltration.
III. Precautions
• Professional maintenance: For complex problems, it is recommended to contact professional maintenance personnel for inspection and repair to avoid self-disassembly and cause greater damage.
• Regular maintenance: Develop a regular maintenance plan to ensure that the LED amusement light is always in good working condition.
• Spare parts reserve: reserve some commonly used spare parts, such as bulbs, drivers, fuses, etc., so that they can be replaced in time.
Through the above maintenance methods and troubleshooting tips, you can ensure the normal operation of the LED amusement lights, extend their service life, and provide a better visitor experience. If you encounter a problem that cannot be solved, it is recommended to contact the manufacturer or professional maintenance personnel in time for processing.
